3D Touch Bed Automatically Level Sensor Print Compensation Sensor, 1m, 1.5m

1. The 3D Touch automatic leveling sensor is a device that uses the Hall effect to achieve leveling
2. The position of the point can be obtained by touching the point on the heating bed, and then compensated by adjusting the Z-axis height during printing, so that printing can be realized even when the platform is uneven
3. Rated current: 300mA
4. Shell material: PC
5. Voltage: 5V
6. Current: 15mA

Shipping list:
-1 x 20cm wire
-1 x 1/1.5m wire
-1 x Sensor
-1 x Wound terminal
-1 x XH2.542pin terminal
-1 x XH2.543pin terminal
-2 x M3 nuts/nails