Although the waterproof performance of iPhone is good, the mobile phone may still be damaged due to water ingress. Many people like to take their mobile phones while swimming or taking a shower. Under these circumstances, it is very likely that the mobile phone will get water in. How to get water out of your phone？Here are some countermeasures for the mobile phone when it get into water.

1.Take the phone out of the water as soon as possible, and immediately turn off the power. Regardless of whether the screen turns black or not, you must shut down quickly to prevent the motherboard from being short-circuited and burnt out. If the power button cannot be shut down by long pressing the power button, please press and hold the power button and the Home button until the system shuts down.If the screen turns black, you cannot press the power button to turn it on. Once the phoneis forced working, a short circuit is likely to occur, causing damage to itsmainboard.

2.Take out the SIM card, remove the mobile phone cover case and other items, and use a tissue or cloth to remove the water outside the phone. Dry the SIM card as soon as possible after removing it. Pay attention to the headphone and power connectors, you can use a small cotton or paper to dry it.

3.Wrap thephone with an absorbent towel or paper towel to absorb the water. Do not shake. The shaking will spread the water that has entered the inside of the phone, and it will cause more damage if the water touches the phone’s components.

4.If the phone gets little water in, you can wrap the phonewith a paper towel, put it in a bag and puta desiccant into the bag, or put it in a bag full of rice, empty the air as much as possible, and seal it. . Then put the whole set in a slightly hot place, such as where the computer is hot.Do not place it in a high-heat environment, do not blow it with the hot air of a hair dryer or expose it to the sun, in these ways will cause the circuit board to deform.

5.After trying the above methods, if it still cannot be used normally, then you need to go to amobile phone repair shop for repair.

About Oriwhiz

ORIWHIZ is a mobile phone LCD/OLED screen and other phone spare parts' manufacturer（factory）,we offer OEM and ODM service to customers all over the world.Our products have ISO9001,CE,FCC,ROSH certificate.All of our products are manufactured by brand new materials and 100% quality test before shipping.We promise our best quality products will be delivered to our clients on time.We have professional customer service and welcome inquiry any time. Our main products include: iPhone LCD,iPhone Charging Port,iPhone Front Camera,iPhone Back Camera,iPhone ear speaker,iPhone Battery.etc.Not only iPhone related products,we also have mobile phone parts for Samsung,Huawei,Xiaomi Oppo,Vivo etc.